Licensing notice

Graphite v13 SE for Windows is asking me to register

The registration window's four messages and the connecting-to-server cases — how to tell a routine renewal notice from a real fault, and what to do in each.

Which window are you looking at?

Graphite has shown you a window about registration or licensing, and you want to get back to your drawing. Most of the time nothing is broken. This page tells you how to be sure in about thirty seconds, and what to do if it turns out something is.

There are two different windows. The registration window asks for a serial number and a registration code, and has four messaging variants. The Secure window checks your registration with our licensing server, or confirms you have a valid entry in a local or remote CodeMeter license security device, and can appear at any time after a registration has been accepted. On the current build of Graphite v13 SE there is a third possibility: a box saying Graphite has encountered a fatal error. It is last in the list. Pick the one on your screen:

Choose your window below and this page shows only the steps for your case.

Which window are you looking at?

The registration window

Titled Register Graphite (Ver. 13.0). Boxes for Name, Company, Serial Number and Registration Code; buttons Register and either Later or Demo.

The registration window on a fresh install: Name, Company, Serial Number and Registration Code boxes carrying the template's instructions — EMAIL: CODES@ASHLAR.COM in the Serial Number box — with Register and Demo buttons and no Later.
The registration window reporting a failed attempt and Your information is invalid.
The registration window reading WARNING... Registration expires in N days, with Register and Later buttons; the Later button is circled.
The registration window after the expiry date, reading IF YOU ARE UNABLE TO REGISTER, PLEASE CONTACT ASHLAR OR YOUR REGIONAL DISTRIBUTOR. with a serial number in the Serial Number box (hidden here), Register and Demo buttons and no Later.

The Secure window — online check

Titled Secure. Says Connecting to server; boxes for Personal ID, Activation code and Serial number. Appears only once a registration has been accepted. Licensed with a Wibu CodeMeter key instead? Its messages differ — the next group is yours.

A caution box: Graphite could not connect to the license server; if it cannot connect during the next N days the license will be blocked. OK button only.
The Secure window: Graphite could not connect to the license server within last 30 days. Connecting to server, with Register and Exit buttons and no Later button.
Graphite's Secure window with a server refusal such as a blocked license, with Register and Exit buttons.

A CodeMeter box

For a program licensed by a Wibu CodeMeter key. The Secure window says Hardware key is unavailable!, often with a second box titled Codemeter_app.exe: Start Error on top of it. What that box says picks the card.

The message Hardware key is unavailable! with a Save as for all button and Exit — Graphite licensed by a Wibu CodeMeter key it cannot see.
Graphite's CodeMeter helper box, titled Codemeter_app.exe: Start Error, reading CmDongle runtime system is not installed!, with an OK button.
Two windows: Graphite's Secure window reading Hardware key is unavailable!, and a box titled Codemeter_app.exe: Start Error reading Out of CmDongle Expiration Time.

A fatal-error box

Titled Fatal error has occurred, with Graphite's own window open behind it.

A box titled Fatal error has occurred: Graphite has encountered a fatal error and can no longer continue normally, with Continue and Prepare email and continue buttons.

Choose the one that matches your screen and we will tell you what it means and what to do.

Whatever the boxes on the window contain — filled in, empty, or still showing last year's details — they do not tell you whether anything is wrong. The Later button versus the Demo button does. The boxes only tell a fresh install from an expired registration.

The window's own words are quoted on this page in English, exactly as the software shows them. German and Japanese installations show them translated.

The registration window

Titled Register Graphite (Ver. 13.0), with boxes for Name, Company, Serial Number and Registration Code. Its buttons are Register and either Later or Demo. Later means nothing is wrong; every other screen offers Demo instead, which you should not press. The window asks you to use Copy and Paste for the serial number and code, and it means it: one mistyped character reads as an invalid registration.

A fresh install — the boxes show instructions

The window reads IF YOU ARE UNABLE TO REGISTER, PLEASE CONTACT ASHLAR OR YOUR REGIONAL DISTRIBUTOR., with Register and Demo and no Later, and the boxes hold the template's instructions rather than your details — the Serial Number box says EMAIL: CODES@ASHLAR.COM. No registration has been entered in this installation yet. That is expected on a new installation, and after an upgrade, because each upgrade is a complete new installation.

Enter your serial number and registration code exactly as issued — copy and paste them from the email that came with your purchase — while logged in as an administrator on this computer (see Administrator rights). The Registration Code box may say visit:www.ashlar.com/codes; that is an instruction, not a sign that a code was lost. No code to hand? Write to us — and do not press Demo (see below).

Which is which — the two are easy to swap:

  • Your serial number looks like C6SEv13COM-#######, sometimes with a license count on the end, such as C6SEv13STU-#######-25Lic. It goes in the Serial Number box.
  • Your registration code looks like g4ebyv-......-......-ybcvkm — groups of letters and digits joined by hyphens. It goes in the Registration Code box.

# and . stand for characters hidden here. The email that came with your purchase labels both.

Your information is invalid.

Usually after a count such as 1 attempt(s) failed. The code was not accepted — almost always a typing slip. Re-enter both values exactly as issued, using Copy and Paste, and check that this code was issued for this serial number and this version of Graphite. A message about a registration conflict, a registration violation or a system clock conflict gets the same treatment — and check the computer's date and time.

Which is which — the two are easy to swap:

  • Your serial number looks like C6SEv13COM-#######, sometimes with a license count on the end, such as C6SEv13STU-#######-25Lic. It goes in the Serial Number box.
  • Your registration code looks like g4ebyv-......-......-ybcvkm — groups of letters and digits joined by hyphens. It goes in the Registration Code box.

# and . stand for characters hidden here. The email that came with your purchase labels both.

Still refused? Send us a photo of the window and the serial number you are entering, with a phone number and good times to call (see When you write to us); we check the pairing on our side. Do not press Demo (see below).

WARNING... Registration expires in N days. — with a Later button

Press it. You can keep working normally, and nothing is wrong with your installation. The window is telling you that it is time to renew.

Graphite begins showing this window about thirty days before any registration code expires, so that a new code can be entered in time. Until the expiry date, Later dismisses it and you carry on. After the expiry date it can no longer be dismissed — so renew before then (see Renewing).

A short-dated code nags from day one. A code issued with fewer than thirty days to run — a trial, or a temporary code from support — is already inside its own notice window on the day you receive it, so this warning appears from the very first launch. That is expected, and it is not a failed code. The Later button will be there. Press it.

Do not press Auto fixing Permissions for this. That button is for a different problem, and on current Windows it only brings up a message saying the app has been blocked (see Administrator rights). Press Later.

People tell us the software “keeps asking me to register” when what it is doing is warning them — and they re-enter codes they never needed to re-enter, because nobody told them about the button. If that is all that has happened to you, we would rather you heard it from us than lost another week to it.

After the expiry date — your serial number in the box, and no Later

The window reads IF YOU ARE UNABLE TO REGISTER, PLEASE CONTACT ASHLAR OR YOUR REGIONAL DISTRIBUTOR. — the same message as a fresh install, sometimes followed by a second sentence such as A registration error has occurred. — with Register and Demo. Two things give it away: Later is no longer offered, and the Serial Number box holds your serial number. (The Name and Company boxes keep whatever was typed at registration — sometimes the template's own Code Required and Contact — so they prove nothing either way.) This is not a fault and not a network problem: the registration has run out. Renewing is the fix (see Renewing). When the new code arrives, enter it exactly as issued, logged in as an administrator. Do not press Demo (see below).

The Secure window — online check

Once a registration has been accepted, Graphite checks it with our licensing server from time to time. When that check cannot complete, a window titled Secure appears — Connecting to server >> >> >>, buttons Register and Exit, and a button labelled Activate manually for 1 day. It can appear at any time after registration, and it is almost always about the network path between your computer and our server — which makes it our problem more than yours. If Graphite is licensed by a Wibu CodeMeter key instead of our server, the same window carries different messages; those cases have their own section.

A countdown caution — OK only

A box says Graphite could not connect to the license server and that if it cannot connect during the next N days the license will be blocked. Graphite still opens and works. It has not reached our server for more than two weeks; after thirty days without contact it stops until it does. Press OK, keep working, and hand the network page to whoever looks after your network before the countdown ends. If it runs out first, the next window is the one below.

could not connect to the license server within last 30 days

On Graphite v13 SE build 13.0.86, the current build, Graphite does not show this window: it shows a fatal error instead. See A fatal error as Graphite starts.

Something on the network path is stopping validation, and you cannot get past the window. Two minutes from any device gets you working today:

  1. On the window, press Activate manually for 1 day. It reveals a Personal ID and your Serial number.
  2. On any device that has working internet — your phone is fine, or a computer on another network — open https://www.ashlar.com/registration/Graphite and enter them.
  3. Type the code it returns into the Activation code field.

Nothing on the CAD workstation needs to work for this, and nothing needs installing. The activation lasts one day; repeat it as needed while the network question is being sorted out. The window itself prints that address beginning http://; the https:// form above is the one to use. Enter any code while logged in as an administrator (see Administrator rights).

Then send whoever looks after your network to the page written for them — what Graphite contacts, five candidate causes each with a test, and four fixes in order of how little they ask.

The server answered — the license is blocked

The window says This Graphite license is blocked. or License of Graphite is blocked on this computer. Our server was reached, and this means we have blocked the license — contact us to discuss it. Nothing on your network changes that.

We block a license when we suspect it is being used outside its license terms and all our attempts to reach the license holder have failed. Write to us and we will work it out together. Exit closes Graphite for now; Register lets you enter a different code if you have one.

A CodeMeter box — licensed by a Wibu CodeMeter key

If Graphite is licensed by a Wibu CodeMeter key instead of our licensing server, the Secure window says Hardware key is unavailable! when something is wrong with the key, or with the CodeMeter software that reads it. Often a second box sits on top of it, titled Codemeter_app.exe: Start Error. What that box says tells you which case below is yours.

Hardware key is unavailable! — a CodeMeter key

Graphite is licensed by a Wibu CodeMeter Security Key — in a USB port on this computer, on a CodeMeter server in your building, or on one out on the internet — and it cannot reach the key right now. Our licensing server is not involved; the path to wherever the key lives is, so nothing on the network page applies. A local key: make sure it is plugged in and the CodeMeter software is installed and running. A remote key: the computer holding it must be on and reachable from this one. Then start Graphite again. “Save as” for all saves every open document before Graphite closes, so nothing is lost while you sort the key out. The CodeMeter software has messages of its own that may appear alongside — including a routine notice that a license expires in so many days, which begins well ahead of the date and is not a fault. If a second box says CmDongle runtime system is not installed! or Out of CmDongle Expiration Time., see the case for that message below. Still not seen? Write to us with your serial number, a photo of the message and a phone number.

CmDongle runtime system is not installed! — the CodeMeter software is missing

On top of Hardware key is unavailable! sits a second box, titled Codemeter_app.exe: Start Error, reading CmDongle runtime system is not installed! Graphite is set to use a Wibu CodeMeter key, but the CodeMeter software that reads the key is not installed on this computer. It is not your network and not our licensing server. Pressing OK brings the box back a few seconds later, for as long as Graphite is open. Press Exit in the Secure window to close Graphite; after that, OK clears the box for good.

Using a CodeMeter key: download the CodeMeter User Runtime for Windows from Wibu-Systems’ download page, install it, restart the computer, and start Graphite again. On an older version of Windows? Further down the same page, under CodeMeter - No Longer Maintained Operating Systems, Wibu lists the last version made for each older system.

No key — Graphite was switched to CodeMeter by accident? Write to us and we will switch it back to our online check with you.

Out of CmDongle Expiration Time. — the license on the key has expired

Behind Hardware key is unavailable! sits a second box, titled Codemeter_app.exe: Start Error, reading Out of CmDongle Expiration Time. That phrase is the difference from the first case in this section: Graphite can reach your CodeMeter key, but the license stored on the key has passed its date. It is not your network and not our licensing server. Graphite needs both: a valid serial number and registration code, and a current license on the key. The key's license is renewed on the key, so re-entering your serial number will not help — nor will reinstalling or moving the key to another port.

Write to us, or to your distributor, with your serial number, a photo of both windows and a phone number, and say it is a CodeMeter key, so the new license goes onto the key. “Save as” for all saves every open document before Graphite closes, so nothing is lost in the meantime.

A fatal error as Graphite starts

On Graphite v13 SE build 13.0.86 — the current build — the thirty-day case does not show the Secure window above. Instead, as Graphite starts, a box titled Fatal error has occurred says Graphite has encountered a fatal error and can no longer continue normally., with Continue and Prepare email and continue, and Graphite's own window is open behind it. It is a fault in that build, not something you did. It appears when Graphite has not reached our licensing server for thirty days, and it comes back every time Graphite starts until it does. Build 13.0.58 does not do this.

  1. Connect this computer to a network that reaches our licensing server — a phone's hotspot will do.
  2. Start Graphite. The box may appear once more; press Continue, then quit Graphite.
  3. Restart the computer.
  4. Start Graphite again. That start is clean — there is no need to register again.

Until then, Continue keeps Graphite open so you can save your work — Graphite itself warns that it will be unstable, so save and quit. If no network you can use reaches our server, send whoever looks after your network the page written for them, and write to us. On build 13.0.58, the thirty-day case shows the Secure window instead.

The DEMO button — don't

Some states of the window offer a DEMO button. Do not press it. Demonstration mode removes saving and printing. It is not a restriction we are placing on you, and you should not need it: a correct code, or a renewal, gets you working with everything intact.

Renewing

Pressing Later carries you to the expiry date, not past it. To continue with Graphite beyond it, there are two ways:

If you would rather someone simply sent you the terms, write to support@ashlar.com and say so.

Administrator rights

Any registration code — yours, a trial, a manual activation — must be entered while logged in as an administrator on this computer. That is not the same as right-clicking and choosing “Run as administrator” from your own account. Graphite stores its registration in a protected location; if it cannot write there, the registration will not survive a restart, and the window is back tomorrow.

Recently reinstalled or upgraded? Each Graphite upgrade is a complete new installation, so a registration entered before it does not carry over. The details page explains what has to hold for a registration to persist.

The Auto fixing Permissions button

The registration window offers an Auto fixing Permissions button, for when you have to enter the registration information every time you start. On current Windows, pressing it brings up a Windows message instead:

“This app has been blocked for your protection. An administrator has blocked you from running this app.” — Publisher: Unknown, with only a Close button.

That message does not come from your administrator or your company’s policy, whatever it says. Windows itself refuses to run the small helper behind that button. Nothing is wrong with your computer, and your IT department has not blocked you. The permissions entry under Layout > Preferences inside Graphite starts the same helper and is stopped the same way.

Please do not try to get around it. Do not switch off Windows security prompts, and do not change folder permissions by hand. Press Close — nothing has been changed.

What to do instead:

  • If the window says WARNING... Registration expires in N days. and has a Later button — press Later. With a trial or a temporary code, that reminder appears at every start until the expiry date. It is normal, and it is not the problem this button was made for.
  • If you really are asked for your name, serial number and code at every start, the registration is not being saved. Enter it once while logged in as an administrator on this computer, as described above.
  • If that does not settle it, write to us with a photo of the window (see When you write to us).

For your IT professional

If validation cannot complete from your network, hand this link to whoever looks after it: /software/licensing-network. It has everything they need in one place — what the client contacts, how to test each of five likely causes, and four remedies in order of how little they ask — so nobody has to discover any of it by packet capture.

When you write to us

Tell us which window you see. A photograph of it taken with your phone is perfectly good — from that one image we can read which of three things is happening and stop guessing. Please include:

  • your serial number and the photo of the window;
  • your name and company;
  • a phone number, good times to call you, and your time zone — a two-minute call often settles it;
  • your language, if English will not work for you.

Then check your spam or junk folder. Our replies often land there. If you have written and heard nothing, look there first — the answer is usually waiting.

The longhand — the thirty-day window, why a registration stops persisting, the 2037 limit and hardware keys — is on the details page.

Send your email to:

support@ashlar.com

with the subject Licensing: Graphite v13 SE on Windows. You can copy the lines below into your message and fill them in:

Serial number:
Name and company:
Phone number:
Good times to call, and my time zone:
Language, if not English:
Which window I see:

and attach the photo of the window.

Revision r1 · published 2026-09-04 · current.
Initial publication — the two windows and their screens for this product and platform, the notice window, the short-dated-code warning, the manual one-day activation, the DEMO warning, renewing, and the administrator-rights condition.

Permanent link to this revision: /software/licensing-graphite-v13-win/r1